The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution.
The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your speakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
DALI OBERON 3 SPECS
| Product series |
OBERON |
| Frequency Range (+/-3 dB) [Hz] |
47 - 26,000 |
| Sensitivity (2,83 V/1 m) [dB] |
87 |
| Nominal Impedance [ohms] |
6 |
| Maximum SPL [dB] |
108 |
| Recommended Amplifier Power [W] |
25 - 150 |
| Crossover Frequency [Hz] |
2,400 |
| Crossover Principle |
2-way |
| High frequency driver, Quantity |
1 x 29 mm |
| High frequency driver, Diaphragm type |
Soft Textile Dome |
| Low frequency driver, Quantity |
1 X 7" |
| Low frequency driver, Diaphragm type |
Wood Fibre Cone |
| Enclosure type |
Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] |
49 |
| Connection Input |
Single Wire |
| Recommended Placement |
Shelf or stand |
| Recommended Distance From Wall [cm] |
5 - 50 |
| Dimensions With Base (HxWxD) [mm] |
350 x 200 x 315 |
| Weight [kg] |
6.3 |
| Accessories Included |
Manual
Rubber Feet
Front Grille
|
