Building on the legacy of the award-winning 6000A, the Audiolab 6000A MKII introduces key advancements inspired by the flagship 9000A and versatile 7000A models. With refined circuitry and enhanced performance, it continues Audiolab’s tradition of delivering exceptional sound at an accessible price point—perfect for audiophiles seeking high-quality audio from a brand with over 40 years of innovation.

A Step Forward in Every Aspect

The 6000A MKII preserves the original's position as an accessible yet remarkable “step-up” amplifier, perfect for entry-level audiophiles but with significant upgrades in sound and features. Visually, the MKII mirrors its predecessor, maintaining seamless integration with existing 6000, 7000, and 9000 series components.

Key Enhancements

Improved Power Supply and Transformer

The Audiolab 6000A MKII uses an improved transformer and implementation. Increased voltage delivered from the transformer secondary windings, and reduced impedance for better control of the power supply voltage. The effect of this is a typically Audiolab sound signature - remarkable sonic consistency that is thoroughly engaging with crisp definition, incredible dynamics, and rhythmic timing.

A substantial 200VA toroidal transformer is followed by 4 x 15000uF reservoir capacitors for the power-amp power supply (30000uF per rail).

This helps the amp to maintain firm control of the music, whilst enabling excellent dynamic range.

Advanced DAC Technology

Audiolab have elevated the DAC performance with the new ESS Sabre ES9038Q2M chipset, an upgrade from the original 6000A’s ES9018. This flagship DAC supports 32-bit/768kHz PCM and incorporates HyperStream® II architecture and Time Domain Jitter Eliminator for ultra-low noise and exceptional dynamic range. Building on the DAC design from the 7000A, the MKII also benefits from a new Class A circuit in the post-DAC active filter stage, offering a more refined listening experience.

Expanded Connectivity

Then, there’s the connectivity: the state-of-the-art digital-to-analogue signal conversion enables the four S/PDIF inputs and new HDMI ARC input for convenient AV system integration – a key area of improvement over the original model and new ‘must’ for a growing number of modern audiophiles. Then there's a step up to a Bluetooth 5.1 aptX HD receiver. for optimum range, speed and performance when streaming over Bluetooth connection.

Audiolab 6000A MKII Integrated Amplifier:
Type: Hybrid Digital Integrated Stereo Amplifier
Amplifier Topology: Class A/B (Power Amplifier Section)

Power Amplifier Section:
Gain: +29dB
Rated Max. Power Output: 2 x 50W (8Ω, THD<1%), 2 x 75W (4Ω, THD<1%)
Frequency Response: 20Hz-20kHz (±0.3dB)
Total Harmonic Distortion (THD): <0.003% (1kHz @ 40W/8Ω)
Signal-to-Noise Ratio (S/N): >110dB (A-weighted)
Max. Output Current: 9A

Preamp & Input Section:
Gain (max.): +8dB (Line), +55dB (Phono MM)
Input Sensitivity: 720mV (Line, Volume = 0dB), 3.1mV (Phono MM, Volume = 0dB)
Input Impedance: 10kΩ (Line), 47kΩ // 100pF (Phono MM)
Total Harmonic Distortion (THD): <0.0004% (Line, 1kHz @ 2V, Volume = 0dB)
Frequency Response: 20Hz-20kHz (±0.1dB)
Signal-to-Noise Ratio (S/N): >110dB (Line, A-weighted), >76dB (Phono MM, A-weighted)
Output Voltage: 2.3V max. (Volume = 0dB)
Output Impedance: 120Ω

DAC Section:
D to A Converter: ES9018K2M
Total Harmonic Distortion (THD): <0.0006% (1kHz @ 0dBFS)
Output Level (0dBFS, 1kHz): 2.05V
Max. Sampling Frequency: 192kHz
Signal-to-Noise Ratio (S/N): >112dB (A-weighted)
Digital Filters: Fast Roll-off, Slow Roll-off, Minimum Phase

Headphone Amplifier:
Total Harmonic Distortion (THD): <0.01% (1kHz, 50mW)
Output Impedance: 2.35Ω
Load Impedance: 20-600Ω

Inputs & Outputs:
Inputs: 4 × Line Level (RCA), 1 × Moving Magnet (MM) Phono (RCA), 3 × Digital (2x Optical, 1x Coaxial), 1 × USB Type B (PC), Bluetooth (aptX HD)
Outputs: Speaker Binding Posts, Pre-Out (RCA), 6.35mm (1/4") Headphone Jack

General Specifications:
Power Requirements: 100V, 115V, 230V, 240V ~ 50-60Hz
Standby Power Consumption: <0.5W
Dimensions (W×H×D): 445mm × 65.5mm × 300mm
Weight: 7.8 kg (Net)
Finish: Brushed Aluminum (Black or Silver)

Included Accessories:
Remote Control, Power Cable, User Manual

Additional Features:
Bluetooth: 5.0 with aptX HD support
Digital Inputs: 2x Optical Toslink, 1x Coaxial RCA, 1x USB for PC audio
Pre-Out Function: Can be used as a dedicated preamp or to connect a subwoofer
Source Direct Mode: Bypasses tone controls and balance for pure signal path
Tone Controls: Defeatable Bass and Treble controls